A 4-layer PCB with a solid ground plane and a separate power plane is recommended. The RF signal traces should be kept short and away from the power and ground planes to minimize noise and radiation.
The RF201LAM4STR requires a bias voltage of 2.7V to 5.5V. Ensure the bias voltage is stable and noise-free, and that the bias current is limited to 1mA to prevent overheating.
The RF201LAM4STR can handle up to 20dBm of input power. Exceeding this limit may cause damage to the device or affect its performance.
The RF201LAM4STR has an input impedance of 50 ohms. Use a pi-network or a T-network impedance matching circuit to match the impedance of the device to your system.
The RF201LAM4STR operates over a temperature range of -40°C to 85°C. Operating outside this range may affect the device's performance or reliability.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
RF201LAM4STR Overview
Use the download button to access the RF201LAM4STR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like RF201,
or try a keyword search, such as Rectifier Diodes
