A good grounding scheme is crucial for the RFSA2113SR. It is recommended to use a solid ground plane on the PCB, and to connect the exposed pad of the device to the ground plane using multiple vias. Additionally, keep the signal traces as short as possible and use 50-ohm impedance-controlled lines to minimize reflections.
To optimize the biasing of the RFSA2113SR, it is recommended to use a bias tee or a separate bias supply for the gate and drain voltages. The optimal bias point will depend on the specific application and frequency of operation. A good starting point is to set the gate voltage to around -0.5V and the drain voltage to around 20-25V, and then adjust from there based on performance measurements.
The maximum safe operating temperature for the RFSA2113SR is 150°C. However, it is recommended to keep the junction temperature below 125°C for optimal reliability and performance.
To prevent overheating of the RFSA2113SR, it is recommended to use a heat sink or thermal pad to dissipate heat away from the device. Additionally, ensure good airflow around the device and consider using a thermal interface material to improve heat transfer.
The recommended input and output matching network for the RFSA2113SR will depend on the specific application and frequency of operation. However, a good starting point is to use a low-pass filter topology with a series inductor and shunt capacitor at the input, and a similar topology with a series capacitor and shunt inductor at the output.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
RFSA2113SR Overview
Use the download button to access the RFSA2113SR 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like RFSA2,
or try a keyword search, such as RF/Microwave Attenuators
About Qorvo
Qorvo is a prominent American semiconductor company that specializes in the design and manufacturing of radio frequency (RF) solutions. The company was formed in 2015 through the merger of TriQuint Semiconductor and RF Micro Devices. Qorvo's product portfolio encompasses a wide range of RF components and semiconductor technologies used in various applications, including wireless communications, aerospace and defense, and IoT (Internet of Things) devices.
