RECOM recommends a PCB layout with a large copper area for heat dissipation, and a thermal management system with a heat sink and thermal interface material to keep the junction temperature below 125°C.
The RGZ-1212D/H is certified to UL60950-1, EN60950-1, and IEC60950-1 safety standards. Ensure your application meets the required safety certifications by following the guidelines in the datasheet and consulting with RECOM's technical support team.
RECOM recommends using a low-ESR ceramic capacitor with a value of 10-22uF, depending on the input voltage and ripple requirements, to ensure stable operation and minimize input voltage ripple.
Use an oscilloscope to monitor the input and output voltages, and check for any signs of overheating, overvoltage, or undervoltage. Consult the datasheet and RECOM's application notes for troubleshooting guidelines and contact RECOM's technical support team for further assistance.
The maximum allowed output capacitance is 220uF. Exceeding this value may cause instability or oscillations in the output voltage. Consult the datasheet and RECOM's application notes for more information on output capacitance and stability.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
RGZ-1212D/H Overview
Use the download button to access the RGZ-1212D/H 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like RGZ-1,
or try a keyword search, such as Power Supply Modules
