The maximum capacitive load is not explicitly stated in the datasheet, but as a general rule, RECOM recommends limiting the output capacitance to 10-20 times the output capacitance of the converter itself, which is 100nF. So, the maximum capacitive load would be around 1-2uF.
While the datasheet specifies an operating temperature range of -40°C to +85°C, the converter can be used in high-temperature environments with some derating. RECOM recommends derating the output power by 2.5% per degree above 60°C to ensure reliable operation.
The RK-1515S/H6 meets various safety certifications, including UL60950-1, EN60950-1, and IEC60950-1. However, to ensure compliance with specific application requirements, engineers should review the certification reports and ensure that the converter is used within its specified operating conditions and parameters.
RECOM provides a recommended PCB layout and thermal management guide in their application notes. Engineers should follow these guidelines to ensure proper heat dissipation and minimize electromagnetic interference (EMI).
Yes, the RK-1515S/H6 can be used in a redundant or parallel configuration to achieve higher power output or redundancy. However, engineers should ensure that the converters are properly synchronized and configured to avoid oscillations or instability.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
RK-1515S/H6 Overview
Use the download button to access the RK-1515S/H6 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like RK-15,
or try a keyword search, such as Power Supply Modules
