The recommended land pattern for the RL1220S-R15-F can be found in the Susumu Co Ltd's application note or on their website. It typically includes a rectangular pad with a size of around 1.2mm x 0.8mm, with a 0.3mm hole in the center for the chip resistor's terminal.
To handle thermal considerations, ensure a sufficient copper area around the resistor to dissipate heat. A minimum of 10mm² of copper area is recommended. Also, consider using thermal vias to improve heat dissipation.
The RL1220S-R15-F has an MSL rating of 1, which means it can withstand a maximum of 30°C and 60% relative humidity for 168 hours. Proper storage and handling procedures should be followed to prevent moisture-related damage.
While the RL1220S-R15-F is a general-purpose resistor, it's not optimized for high-frequency applications. For frequencies above 100MHz, consider using a high-frequency resistor with a lower inductance and capacitance.
The recommended soldering profile for the RL1220S-R15-F is a peak temperature of 260°C, with a dwell time of 10-30 seconds. A reflow soldering process is recommended, and the component should be kept away from direct heat sources.
Trust Checks
This model has been verified by system checks.
System Verified
Sponsored
RL1220S-R15-F Overview
Use the download button to access the RL1220S-R15-F schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like RL122,
or try a keyword search, such as Fixed Resistors
