RLS-126-R footprint, schematic symbol and 3D model by RECOM Power

Symbol

PCB Footprints

3D Models

RLS-126-R Details

RECOM recommends a PCB layout with a large copper area connected to the module's thermal pad to ensure good heat dissipation. A minimum of 2 oz copper thickness is recommended.
To ensure reliability, RECOM recommends operating the module within the specified temperature range (up to 85°C) and providing adequate airflow to prevent overheating. Additionally, ensure that the module is properly mounted and connected to a heat sink if necessary.
RECOM recommends using a low-ESR ceramic capacitor (e.g., X7R or X5R) with a value of 10-22 μF, depending on the specific application and input voltage range.
RECOM recommends using a TVS diode or a transient voltage suppressor (TVS) in parallel with the input capacitor to protect the module from voltage transients and surges.
The maximum allowed output capacitance is 47 μF. Exceeding this value may cause instability or oscillation in the module.

Expert Contribution

System Verified

Community Approved

Use the download button to access the RLS-126-R schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like RLS-1, or try a keyword search, such as Fixed Inductors

If you searched for RLS-126-R, you might also be interested in these parts:

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →