Kamaya Inc recommends a 4-layer PCB with a dedicated ground plane and thermal vias to dissipate heat. A minimum of 2oz copper thickness is recommended for the power traces. Additionally, a thermal pad on the bottom of the package should be connected to a heat sink or a thermal interface material.
To ensure reliable operation in high-temperature environments, it's essential to follow the recommended operating temperature range (–40°C to 125°C) and consider derating the device's power dissipation. Additionally, ensure proper thermal management, and consider using a heat sink or thermal interface material to dissipate heat.
Kamaya Inc recommends a peak reflow temperature of 260°C, with a soldering time of 10-30 seconds. The recommended soldering profile is: 150°C for 60-90 seconds, 180°C for 60-90 seconds, and 220°C for 10-30 seconds.
To troubleshoot common issues, ensure that the input voltage is within the recommended range, and the output capacitor is properly selected. Check for PCB layout issues, such as poor grounding or inadequate decoupling. Also, verify that the device is properly soldered and that there are no signs of overheating.
Kamaya Inc recommends using a 10uF ceramic capacitor with a voltage rating of 50V or higher for the input capacitor. For the output capacitor, a 22uF ceramic capacitor with a voltage rating of 25V or higher is recommended. The capacitors should be placed as close to the device as possible to minimize parasitic inductance.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
RMC1/16K4701FTP Overview
Use the download button to access the RMC1/16K4701FTP schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like RMC1/,
or try a keyword search, such as Fixed Resistors
