RECOM recommends a PCB layout with a large copper area connected to the module's thermal pad to ensure good heat dissipation. A minimum of 1 oz copper thickness is recommended, and the copper area should be connected to a heat sink or a metal plate for further heat dissipation.
Yes, the RN-1207S is designed to withstand high-vibration environments. However, it's recommended to follow the recommended PCB layout and mounting guidelines to ensure the module is securely attached to the PCB. Additionally, the module's pins should be soldered securely to prevent damage from vibration.
The RN-1207S meets various safety certifications, including UL60950-1, EN60950-1, and IEC60950-1. To ensure compliance, follow the recommended PCB layout, component selection, and assembly guidelines. Additionally, consult with RECOM Power Inc or a qualified safety expert to ensure the module is used in accordance with the relevant safety standards.
RECOM recommends using a low-ESR ceramic capacitor with a value of 10uF to 22uF, rated for the input voltage range. The capacitor should be placed as close as possible to the module's input pins to minimize noise and ensure stable operation.
Yes, the RN-1207S can be used in a redundant or parallel configuration to achieve higher power ratings or improve system reliability. However, it's essential to follow RECOM's guidelines for parallel operation and ensure that the modules are properly synchronized and monitored to prevent damage or instability.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
RN-1207S Overview
Use the download button to access the RN-1207S schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like RN-12,
or try a keyword search, such as Power Supply Modules
