RECOM recommends a PCB layout with a large copper area connected to the module's thermal pad to ensure good heat dissipation. A minimum of 1 oz copper thickness is recommended, and the copper area should be connected to a heat sink or a metal plate for further heat dissipation.
To ensure reliability in high-temperature environments, RECOM recommends following the derating curves provided in the datasheet, using a suitable heat sink, and ensuring good airflow around the module. Additionally, the module should be operated within the specified temperature range and with a suitable input voltage to prevent overheating.
RECOM recommends using a low-ESR ceramic capacitor with a value of 10-22uF, X7R or X5R dielectric, and a voltage rating of 50V or higher. The capacitor should be placed as close as possible to the module's input pins to minimize noise and ripple.
Yes, the RO-0524S/P can be used in a redundant or parallel configuration, but RECOM recommends consulting with their application engineers to ensure proper design and implementation. The modules should be connected in a way that ensures equal current sharing and proper synchronization to prevent oscillations or instability.
The typical MTBF of the RO-0524S/P is >1 million hours, calculated according to MIL-HDBK-217F, Notice 2, at 40°C ambient temperature and 50% load. However, the actual MTBF may vary depending on the application, operating conditions, and other factors.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
RO-0524S/P Overview
Use the download button to access the RO-0524S/P 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like RO-05,
or try a keyword search, such as Power Supply Modules
