RECOM Power Inc recommends a PCB layout with a large copper area connected to the module's thermal pad to ensure good heat dissipation. A minimum of 2 oz copper thickness is recommended, and the copper area should be connected to a heat sink or a metal plate for further heat dissipation.
To ensure reliability in high-temperature environments, it is essential to follow the recommended derating curves for the module's output power and input voltage. Additionally, ensure good airflow around the module, and consider using a heat sink or a metal plate to dissipate heat. It is also recommended to follow the recommended storage and operating temperature ranges.
RECOM Power Inc recommends using a low-ESR ceramic capacitor with a value of 10uF to 22uF, rated for the input voltage range of the module. The capacitor should be placed as close as possible to the input pins of the module to minimize noise and ripple.
Yes, the RO-2412S/H can be used in a redundant configuration to achieve high reliability and availability. However, it is essential to ensure that the modules are properly synchronized and that the output voltages are matched to prevent any damage or instability in the system.
The typical MTBF of the RO-2412S/H is around 1.5 million hours, calculated according to the Telcordia SR-332 standard. However, this value may vary depending on the operating conditions, temperature, and other environmental factors.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
RO-2412S/H Overview
Use the download button to access the RO-2412S/H 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like RO-24,
or try a keyword search, such as Power Supply Modules
