Description:Photointerrupter Double Mold Type: ROHM's optical sensors serve as eyes to monitor changes of any motions, and comply with customer's day-to-day diversifying requests.
The recommended operating temperature range for the RPI-243 is -40°C to 125°C.
The RPI-243 requires a stable power supply with a voltage range of 2.7V to 5.5V. Ensure the power supply is decoupled with a 10uF capacitor and a 100nF capacitor in parallel to reduce noise and ensure stable operation.
The maximum current rating for the RPI-243 is 50mA. Exceeding this rating may cause damage to the device.
To configure the RPI-243 for I2C communication, connect the SCL pin to the clock line and the SDA pin to the data line. Ensure the I2C bus is properly terminated with pull-up resistors and that the slave address is set correctly.
The EN (Enable) pin is used to enable or disable the RPI-243. When the EN pin is set high, the device is enabled, and when it is set low, the device is disabled.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
RPI-243 Overview
Use the download button to access the RPI-243 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like RPI-2,
or try a keyword search, such as Slotted Switch
