ROHM recommends a thermal pad size of at least 2.5mm x 2.5mm with multiple vias to the ground plane to ensure efficient heat dissipation. A minimum of 1oz copper thickness is also recommended.
The RQ3E100BNTB1 requires a stable input voltage (VIN) between 2.5V and 5.5V, and a bias voltage (VBIAS) between 1.2V and 3.3V. Ensure that the bias voltage is set to the recommended value (typically 2.5V) for optimal performance.
The maximum power dissipation for the RQ3E100BNTB1 is 1.5W. Exceeding this limit may cause the device to overheat, leading to reduced performance or even damage.
The RQ3E100BNTB1 is rated for operation up to 125°C (TJ). However, it's essential to ensure proper thermal management and derate the power dissipation accordingly to prevent overheating.
ROHM recommends using ESD protection devices, such as TVS diodes or ESD arrays, on the input and output pins to prevent damage from electrostatic discharge.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
RQ3E100BNTB1 Overview
Use the download button to access the RQ3E100BNTB1 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like RQ3E1,
or try a keyword search, such as Power Field-Effect Transistors