RECOM recommends a PCB layout with a large copper area connected to the module's thermal pad to ensure good heat dissipation. A minimum of 2 oz copper thickness is recommended, and the copper area should be connected to a heat sink or a metal plate for further heat dissipation.
Use a suitable input voltage regulator or a voltage stabilizer to ensure the input voltage stays within the recommended range of 36-72V. Additionally, consider using a voltage supervisor or a voltage monitor to detect any input voltage deviations.
The maximum allowed capacitance on the output is 220uF. Exceeding this value may cause instability or oscillations in the output voltage. It's recommended to use a capacitor with a low ESR (Equivalent Series Resistance) to minimize the risk of oscillations.
The RS-2415SZ is rated for operation up to 80°C ambient temperature. However, derating the output power is recommended for temperatures above 60°C to ensure reliable operation. Consult the datasheet for derating curves and guidelines.
Use a suitable input filter or a surge protector to protect the module from input voltage transients and surges. A TVS (Transient Voltage Suppressor) diode or a varistor can be used to clamp the input voltage and prevent damage to the module.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
RS-2415SZ Overview
Use the download button to access the RS-2415SZ 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like RS-24,
or try a keyword search, such as Power Supply Modules
