RECOM recommends a PCB layout with a large copper area connected to the module's thermal pad to ensure good heat dissipation. A minimum of 2 oz copper thickness is recommended, and the copper area should be connected to a heat sink or a metal plate for further heat dissipation.
To ensure reliability in high-temperature environments, RECOM recommends following the derating curves provided in the datasheet, using a suitable heat sink, and ensuring good airflow around the module. Additionally, the module should be operated within the recommended temperature range and the input voltage should be kept within the specified limits.
RECOM recommends using a low-ESR ceramic capacitor with a value of 10uF to 22uF, rated for the input voltage, as close as possible to the module's input pins. This helps to reduce input ripple and noise, and ensures stable operation.
Yes, the RS6-1215D can be used in a redundant configuration to achieve high reliability. RECOM recommends using a diode ORing configuration to connect multiple modules in parallel, and ensuring that the modules are properly synchronized to prevent oscillations.
The typical start-up time for the RS6-1215D is around 10ms to 20ms, depending on the input voltage and output load. However, this time can be affected by the input voltage rise time, output capacitance, and other factors.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
RS6-1215D Overview
Use the download button to access the RS6-1215D 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like RS6-1,
or try a keyword search, such as Power Supply Modules
