RECOM recommends a PCB layout with a large copper area for heat dissipation, and a thermal management system with a heat sink and thermal interface material to keep the junction temperature below 125°C.
The RS6-123.3S is certified to UL60950-1, EN60950-1, and IEC60950-1 safety standards. Ensure that your system design meets the required safety standards by following the guidelines in the datasheet and RECOM's application notes.
RECOM recommends using a low-ESR ceramic capacitor with a value of 10-22uF, depending on the input voltage and ripple requirements, to ensure stable operation and minimize input voltage ripple.
Use a oscilloscope to monitor the input and output voltages, and check for any signs of overheating, overvoltage, or undervoltage. Consult RECOM's application notes and troubleshooting guides for specific guidance on debugging common issues.
The maximum allowed output capacitance is 220uF. Exceeding this value may cause instability or oscillations in the output voltage.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
RS6-123.3S Overview
Use the download button to access the RS6-123.3S 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like RS6-1,
or try a keyword search, such as Power Supply Modules
