ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently.
Use a heat sink or thermal interface material to keep the junction temperature below 150°C. Ensure good airflow and avoid blocking airflow around the device.
The maximum allowed voltage on the input pins is 6.5V, exceeding this may cause damage to the device.
Yes, but ensure the device is properly sealed and conformal coated to prevent moisture ingress. ROHM recommends following IPC-J-STD-001 standards for moisture protection.
Check the input voltage, ensure it's within the recommended range (4.5V to 5.5V). Verify the enable pin is properly connected and the device is not in shutdown mode.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
RSA6.1J4T2R Overview
Use the download button to access the RSA6.1J4T2R schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like RSA6.,
or try a keyword search, such as Transient Suppressors
