ROHM recommends a PCB layout with a thermal pad connected to a large copper area on the bottom layer, and multiple vias to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
To ensure proper biasing during startup, ROHM recommends using a soft-start circuit or a voltage ramp-up circuit to slowly increase the gate-source voltage (Vgs) to the recommended operating range.
ROHM recommends keeping the parasitic inductance in the PCB layout as low as possible, ideally below 1nH. Excessive inductance can lead to ringing and oscillations, affecting the device's performance and reliability.
While the RSD150N06FRATL is a high-speed device, it's primarily designed for low-frequency switching applications. For high-frequency switching (>100kHz), ROHM recommends using a device specifically designed for high-frequency operation, such as the RSD150N06FNLTL.
ROHM recommends a gate resistor value between 10Ω to 100Ω, depending on the specific application and switching frequency. A lower gate resistor value can improve switching speed, but may increase power losses.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
RSD150N06FRATL Overview
Use the download button to access the RSD150N06FRATL schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like RSD15,
or try a keyword search, such as Power Field-Effect Transistors
