RSLP035-48 - ENEDO

RSLP035-48 Frequently Asked Questions (FAQs)

• What is the recommended PCB layout for optimal thermal performance?
  Enedo recommends a PCB layout with a large copper area connected to the module's thermal pad to ensure efficient heat dissipation. A minimum of 2 oz copper thickness is recommended.
• How do I ensure reliable start-up of the module in high-temperature environments?
  To ensure reliable start-up, Enedo recommends adding a soft-start circuit to limit the inrush current and prevent voltage drops during start-up. Additionally, ensure the module is properly heatsinked and the ambient temperature is within the specified range.
• What is the maximum capacitive load that the module can drive?
  The RSLP035-48 can drive a maximum capacitive load of 10,000 μF. Exceeding this value may cause instability or oscillations in the output voltage.
• How do I implement overvoltage protection (OVP) for the module?
  Enedo recommends using an external OVP circuit with a voltage threshold set to 55 V to protect the module from voltage surges. The OVP circuit should be designed to disconnect the input voltage in case of an overvoltage event.
• What is the recommended input fuse rating for the module?
  Enedo recommends using a fuse with a rating of 5 A to 10 A, depending on the specific application and input voltage. The fuse should be selected based on the module's maximum input current rating and the system's fault current requirements.