Part Image

RSMN-2010 - TDK Lambda

Description: Power Line EMC Filters, 1-phase(250V), Rated Current:10A, Pulse attenuation?Wide range high attenuation, Block terminal

Download RSMN-2010 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
3D Models
RSMN-2010 - TDK Lambda  - 3D model
click to zoom
Note! To download footprints and symbols, use the build and request forms below

Build

Launch Build Wizard
Build Wizard not available for this package category!

Request (48 hours)

RSMN-2010 Details

  • Manufacturer Part Number:

    RSMN-2010

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Transferred

  • Manufacturer:

    TDK-Lambda Corporation

  • Approvals:

    UL; CSA; EN

  • Filter Type:

    SINGLE PHASE EMI FILTER

  • Height:

    35 mm

  • Insulation Resistance-Min:

    100 MΩ

  • Leakage Current-Max:

    1 mA

  • Length:

    98 mm

  • Mounting Type:

    CHASSIS MOUNT

  • Operating Frequency:

    60Hz Hz

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -25 °C

  • Rated Current:

    10 A

  • Rated Voltage:

    250 V

  • Width:

    52 mm

RSMN-2010 Frequently Asked Questions (FAQs)

  • TDK-Lambda recommends a PCB layout with a solid copper ground plane and thermal vias under the module to ensure efficient heat dissipation. A minimum of 2oz copper thickness is recommended.
  • To ensure reliable start-up, TDK-Lambda recommends using a soft-start circuit or a ramp-up voltage supply to prevent inrush currents. Additionally, the module should be derated for high-temperature operation.
  • The maximum allowable capacitance on the output of the RSMN-2010 is 10,000uF. Exceeding this value may cause instability or oscillation in the module.
  • Yes, the RSMN-2010 can be used in a redundant or parallel configuration, but it requires careful consideration of the system design, including synchronization and current sharing. TDK-Lambda recommends consulting with their application engineers for guidance.
  • TDK-Lambda recommends using a common-mode choke and a differential-mode filter capacitor to reduce EMI emissions. The specific filter configuration may vary depending on the system requirements and regulatory compliance.

Trust Checks

No trust score is available for this model.
Trust Score Unavailable
Sponsored

RSMN-2010 Overview

Use the download button to access the RSMN-2010 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like RSMN-, or try a keyword search, such as Mains Filters

Parts related to RSMN-2010

Showing 0 results

Select Package Category

Package Categories

Datasheet PDF Preview