A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the input and output capacitors close to the IC, and use short and wide traces for the power lines.
To ensure stability, use a minimum output capacitance of 10uF with an ESR of 1ohm or less, and place the capacitor close to the output pin. Also, ensure that the input voltage is within the recommended range.
The maximum input voltage is 30V, but it's recommended to keep it below 28V to ensure reliable operation and to prevent damage to the IC.
The RT9013-30GB is rated for operation up to 125°C, but the maximum junction temperature should not exceed 150°C. Ensure proper heat sinking and thermal management to prevent overheating.
The power dissipation can be calculated using the formula: Pd = (Vin - Vout) x Iout. Ensure that the calculated power dissipation is within the recommended maximum power dissipation of 3.5W.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
RT9013-30GB Overview
Use the download button to access the RT9013-30GB schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like RT901,
or try a keyword search, such as Linear Regulator ICs
Suggested Parts
If you searched for RT9013-30GB, you might also be interested in these parts: