The recommended PCB layout for the RTL8211FD-CG can be found in the Realtek application note AN-135, which provides guidelines for PCB design, component placement, and thermal management.
The RTL8211FD-CG can be configured for different Ethernet speeds using the Speed Control Register (SCR) and the Auto-Negotiation Advertisement Register (ANAR). The specific configuration depends on the desired speed and duplex mode.
The power consumption of the RTL8211FD-CG varies depending on the mode of operation. In typical operating conditions, the power consumption is around 350mW in 1000BASE-T mode and 200mW in 100BASE-TX mode. The power consumption can be further reduced in low-power modes.
The RTL8211FD-CG supports VLAN tagging through the VLAN Tag Register (VLANTR). The VLAN tag can be inserted or stripped based on the configuration of the VLANTR and the VLAN Filter Register (VLANFR).
The RTL8211FD-CG supports cable lengths up to 100 meters for 1000BASE-T and 100BASE-TX modes, and up to 200 meters for 10BASE-T mode, assuming a Category 5e or higher cable.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
RTL8211FD-CG Overview
Use the download button to access the RTL8211FD-CG 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like RTL82,
or try a keyword search, such as Network Interfaces
