The recommended PCB layout for the RTL8211FDI-CG can be found in the Realtek application note AN-135, which provides guidelines for PCB design, component placement, and thermal management.
The RTL8211FDI-CG can be configured for different Ethernet speeds using the Speed Control Register (SCR) and the Auto-Negotiation Advertisement Register (ANAR). The specific configuration depends on the desired speed and duplex mode.
The power consumption of the RTL8211FDI-CG varies depending on the mode of operation. In typical operating conditions, the power consumption is around 350mW in 1000BASE-T mode and 200mW in 100BASE-TX mode. The power consumption can be further reduced in low-power modes.
The RTL8211FDI-CG supports VLAN tagging and priority queuing through the VLAN Tag Register (VLANTR) and the Priority Queue Register (PQR). The specific implementation depends on the desired VLAN configuration and priority queuing scheme.
The RTL8211FDI-CG has a maximum junction temperature of 125°C. Thermal management considerations include providing adequate heat dissipation, using thermal pads or heat sinks, and ensuring good airflow around the device.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
RTL8211FDI-CG Overview
Use the download button to access the RTL8211FDI-CG schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like RTL82,
or try a keyword search, such as Network Interfaces
