The recommended PCB land pattern for the S1210R-682J is a rectangular pad with a size of 3.8mm x 2.5mm, with a 1.3mm diameter hole in the center for the pin. The pad should be solder-mask defined and have a non-solder-mask-defined area of 0.5mm around the pin.
The S1210R-682J has a maximum operating temperature of 125°C. To ensure reliable operation, it's essential to provide adequate thermal relief by using a thermal pad or via under the component, and ensuring good airflow around the device.
The recommended soldering profile for the S1210R-682J is a reflow profile with a peak temperature of 260°C, a dwell time above 220°C of 30-60 seconds, and a ramp rate of 3°C/second. Hand soldering is not recommended due to the component's small size and high thermal sensitivity.
The S1210R-682J is designed to withstand moderate vibration levels, but it's essential to ensure that the PCB is properly secured and the component is adequately soldered to prevent mechanical stress. For extreme vibration environments, additional mechanical reinforcement or component selection may be necessary.
To ensure EMC, it's essential to follow proper PCB layout and design guidelines, such as keeping the inductor away from sensitive components, using a ground plane, and minimizing loop areas. Additionally, consider using shielding or filtering components to reduce electromagnetic interference.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
S1210R-682J Overview
Use the download button to access the S1210R-682J schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like S1210,
or try a keyword search, such as Fixed Inductors
