The recommended PCB footprint for the S8020L is a rectangular pad with a minimum size of 1.5mm x 0.8mm, with a 0.5mm diameter hole in the center for the thermal tab.
To ensure reliable soldering, use a soldering iron with a temperature of 250°C to 270°C, and apply a small amount of solder paste to the PCB pads. Avoid applying excessive heat or pressure, which can damage the device.
The maximum allowed voltage drop across the S8020L is 1.5V, as specified in the datasheet. Exceeding this voltage drop may reduce the device's reliability and lifespan.
The S8020L is rated for operation up to 150°C, but it's recommended to derate the device's current handling capability at higher temperatures. Consult the datasheet for specific derating guidelines.
To protect the S8020L from EOS, use a transient voltage suppressor (TVS) or a zener diode in parallel with the device. This will help clamp voltage transients and prevent damage to the device.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
S8020L Overview
Use the download button to access the S8020L schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like S8020,
or try a keyword search, such as Silicon Controlled Rectifiers