The recommended mounting method is to use a screw or clip to secure the device to a heat sink or chassis, ensuring good thermal contact. Ohmite recommends using a thermal interface material (TIM) to fill any gaps between the device and the heat sink.
Yes, the SA-LED-151E is designed to withstand high-vibration environments. However, it's essential to ensure proper mounting and secure the device to prevent damage or dislodging. Consult Ohmite's application notes for specific guidance on vibration testing and mounting recommendations.
Follow standard ESD precautions when handling the SA-LED-151E. Use a soldering iron with a temperature-controlled tip, and avoid applying excessive heat or force, which can damage the device. Ohmite recommends using a soldering profile with a peak temperature of 260°C (500°F) for a maximum of 10 seconds.
The maximum allowable voltage for the SA-LED-151E is 50V. Exceeding this voltage can cause permanent damage to the device. Ensure that the voltage rating is not exceeded during operation, and consider using voltage protection devices or circuits if necessary.
The SA-LED-151E is not designed for use in humid or wet environments. It's essential to ensure the device is operated in a dry, clean environment to prevent corrosion or damage. If operation in a humid environment is unavoidable, consider using conformal coating or other environmental protection methods.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
SA-LED-151E Overview
Use the download button to access the SA-LED-151E 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like SA-LE,
or try a keyword search, such as Heat Sinks
