The recommended mounting method is to use a screw or clip to secure the device to a heat sink or chassis, ensuring good thermal contact. Ohmite recommends using a thermal interface material (TIM) to fill any gaps between the device and the heat sink.
Yes, the SA-LED-176E is designed to withstand high-vibration environments. However, it's essential to ensure proper mounting and secure the device to prevent damage or dislodging. Consult Ohmite's application notes for specific guidance on vibration testing and mounting recommendations.
When soldering and assembling the SA-LED-176E, follow standard ESD precautions to prevent damage. Use a soldering iron with a temperature-controlled tip, and avoid applying excessive heat or force. Ohmite recommends using a soldering profile with a peak temperature of 260°C (500°F) for 10-15 seconds.
The maximum allowable power derating for the SA-LED-176E depends on the ambient temperature and airflow. As a general guideline, Ohmite recommends derating the power by 1.5% per degree Celsius above 25°C (77°F). Consult the datasheet and application notes for specific derating curves and guidelines.
The SA-LED-176E is designed to operate in a dry environment. While it can withstand some humidity, it's not recommended for use in wet or humid environments. If exposure to moisture is unavoidable, consider using a conformal coating or potting compound to protect the device. Consult Ohmite's application notes for specific guidance on environmental testing and protection.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
SA-LED-176E Overview
Use the download button to access the SA-LED-176E 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like SA-LE,
or try a keyword search, such as Heat Sinks
