A recommended PCB layout for the SB360-T includes a solid ground plane, short and wide traces for the input and output, and a decoupling capacitor (e.g., 100nF) between the VIN and GND pins. Additionally, keep the switching node (SW pin) away from sensitive analog circuits.
To ensure the SB360-T operates within its SOA, monitor the input voltage, output current, and junction temperature. Keep the input voltage within the recommended range (4.5V to 18V), output current below the maximum rating (3A), and junction temperature below 125°C. Use thermal design and layout techniques to minimize thermal resistance.
A low-ESR, high-frequency ceramic capacitor (e.g., X7R or X5R) with a value between 10uF to 22uF is recommended for the input capacitor. This helps to filter out high-frequency noise and ensure stable operation.
Optimize the output filter design by selecting a suitable inductor value (e.g., 1uH to 10uH) and output capacitor value (e.g., 10uF to 47uF) based on the desired output voltage ripple and transient response. Use a low-ESR output capacitor and consider adding a damping resistor to prevent oscillations.
During startup, the SB360-T has a soft-start feature that ramps up the output voltage to prevent inrush currents. During shutdown, the device enters a low-power standby mode, and the output voltage decays rapidly to minimize energy loss.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SB360-T Overview
Use the download button to access the SB360-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SB360,
or try a keyword search, such as Rectifier Diodes
