Sanrex Corporation recommends a 4-layer PCB with a solid ground plane and a separate power plane for the accelerometer. The device should be placed near the center of the PCB, and the signal traces should be kept short and shielded to minimize noise.
The SCA200DA160 requires a two-point calibration process. First, apply a known acceleration (e.g., 1g) and record the output voltage. Then, apply a second known acceleration (e.g., -1g) and record the output voltage. Use these two points to calculate the sensitivity and offset of the device.
The SCA200DA160 is rated for operation from -40°C to 125°C. However, the device's accuracy and sensitivity may degrade at extreme temperatures. It's recommended to operate the device within a temperature range of -20°C to 85°C for optimal performance.
Yes, the SCA200DA160 is designed to operate in high-vibration environments. However, it's essential to ensure that the device is properly mounted and secured to prevent mechanical stress and damage. Sanrex Corporation recommends using a sturdy PCB and a secure mounting method, such as a screw or adhesive.
Sanrex Corporation recommends using a 10uF ceramic capacitor in parallel with a 100nF ceramic capacitor to decouple the power supply. This helps to filter out noise and ensure stable operation of the device.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
SCA200DA160 Overview
Use the download button to access the SCA200DA160 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like SCA20,
or try a keyword search, such as Silicon Controlled Rectifiers
