ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended, and the thermal pad should be connected to a ground plane or a dedicated heat sink.
To ensure reliable operation in high-temperature environments, it's essential to follow the recommended operating conditions, including the maximum junction temperature (Tj) of 150°C. Additionally, consider using a heat sink or thermal management system to keep the device temperature within the recommended range.
ROHM recommends using a low-ESR ceramic capacitor with a value of 10uF to 22uF, depending on the specific application requirements. The capacitor should be placed as close to the VIN pin as possible to minimize noise and ensure stable operation.
To troubleshoot issues with the device not turning on or not regulating the output voltage, check the input voltage, ensure the enable pin is properly biased, and verify the output voltage feedback loop is correctly connected. Also, check for any signs of overheating, and ensure the device is not damaged or counterfeit.
ROHM recommends using a low-ESR ceramic capacitor with a value of 10uF to 47uF, depending on the specific application requirements. The capacitor should be placed as close to the VOUT pin as possible to minimize noise and ensure stable operation.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SCS220AE2GC11 Overview
Use the download button to access the SCS220AE2GC11 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SCS22,
or try a keyword search, such as Rectifier Diodes
