ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
To ensure stable operation, use a low-pass filter or a ferrite bead in series with the input signal to reduce high-frequency noise. Additionally, decouple the power supply lines with capacitors to prevent noise coupling.
The maximum allowed voltage on the enable pin (EN) is 6V, which is higher than the recommended operating voltage of 5V. However, it's essential to ensure the voltage on the EN pin does not exceed the maximum rating to prevent damage.
The SCS220AGC17 is rated for operation up to 125°C. However, the device's performance and reliability may degrade at higher temperatures. It's essential to consider the thermal design and heat dissipation mechanisms to ensure reliable operation in high-temperature environments.
To troubleshoot issues with output voltage regulation, check the input voltage, output load, and feedback resistors. Ensure the input voltage is within the recommended range, the output load is within the specified current limit, and the feedback resistors are correctly connected and of the correct value.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SCS220AGC17 Overview
Use the download button to access the SCS220AGC17 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SCS22,
or try a keyword search, such as Rectifier Diodes
