ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
ROHM recommends following the derating curves in the datasheet for operation above 125°C. Additionally, ensure proper thermal design, and consider using a heat sink or thermal interface material to reduce junction temperature.
The maximum allowed voltage on the input pins is 6V, as specified in the datasheet. Exceeding this voltage may cause damage to the device.
Yes, the SCT3105KRC15 is suitable for switching regulator applications. However, ensure that the device is properly biased, and the switching frequency is within the recommended range (typically 100 kHz to 1 MHz).
ROHM recommends following proper ESD handling procedures, such as using an ESD wrist strap or mat, and ensuring that the device is stored in an ESD-protected environment. Additionally, consider adding external ESD protection devices, such as TVS diodes, to the PCB design.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
SCT3105KRC15 Overview
Use the download button to access the SCT3105KRC15 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like SCT31,
or try a keyword search, such as Power Field-Effect Transistors
