Bourns recommends a symmetrical PCB layout with the inductor centered on the PCB, and the pads should be at least 1.5 mm wide to ensure good soldering. Additionally, keep the PCB traces as short as possible and avoid routing high-frequency signals near the inductor.
The SDE1006A-331K has a maximum operating temperature of 125°C. Ensure good airflow around the inductor, and consider using a thermal pad or heat sink if the ambient temperature exceeds 85°C. Also, avoid overheating during soldering and rework.
The SRF of the SDE1006A-331K is not explicitly stated in the datasheet, but it can be estimated using the inductor's inductance and capacitance values. Typically, the SRF is around 100-200 MHz for this inductor.
The SDE1006A-331K is designed to withstand moderate vibration levels, but it's essential to ensure the inductor is properly secured to the PCB using a suitable adhesive or mechanical fastening method. Consult Bourns' application notes for more information on vibration testing and considerations.
The saturation current of the SDE1006A-331K can be determined by consulting the inductor's DC resistance and inductance values. A general rule of thumb is to limit the DC current to 70-80% of the inductor's rated current to avoid saturation.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SDE1006A-331K Overview
Use the download button to access the SDE1006A-331K schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SDE10,
or try a keyword search, such as Fixed Inductors
