SEAFP-40-01-L-08-RA-WT-GP - SAMTEC

SEAFP-40-01-L-08-RA-WT-GP Frequently Asked Questions (FAQs)

• What is the recommended torque for the screw locks on this connector?
  The recommended torque for the screw locks on SEAFP-40-01-L-08-RA-WT-GP is 0.5-1.5 in-lbs (0.056-0.169 Nm) according to Samtec's application notes.
• Can I use this connector in a high-vibration environment?
  Yes, the SEAFP-40-01-L-08-RA-WT-GP is designed to withstand high-vibration environments. Samtec's ruggedized SEAF series connectors are tested to meet the requirements of IEC 61373 Cat 2, which includes vibration testing.
• Is this connector suitable for use in harsh environments, such as high-temperature or high-humidity applications?
  Yes, the SEAFP-40-01-L-08-RA-WT-GP is designed for use in harsh environments. It has a operating temperature range of -55°C to 125°C and is resistant to moisture and humidity according to Samtec's environmental testing standards.
• What is the mating cycle life of this connector?
  The SEAFP-40-01-L-08-RA-WT-GP has a mating cycle life of 500 cycles minimum, according to Samtec's testing and validation procedures.
• Can I use this connector with a different PCB thickness than the recommended 1.57 mm?
  While the SEAFP-40-01-L-08-RA-WT-GP is designed for use with 1.57 mm thick PCBs, Samtec recommends consulting their application notes and design guidelines for using the connector with different PCB thicknesses. In general, the connector can accommodate PCB thicknesses from 1.27 mm to 2.36 mm, but this may affect the connector's performance and reliability.