SF-1210S100W-2 footprint, schematic symbol and 3D model by Bourns

Symbol

PCB Footprints

3D Models

SF-1210S100W-2 Details

Bourns recommends a symmetrical PCB layout with a solid ground plane, and keeping the input and output traces as short as possible to minimize parasitic inductance and capacitance. A 4-layer PCB with a dedicated power plane is also recommended.
Use a soldering iron with a temperature of 250°C to 260°C, and ensure the soldering time is less than 3 seconds per pin. Avoid applying excessive force or pressure, and use a solder with a melting point above 180°C. Pre-heating the PCB to 100°C to 120°C can also help prevent thermal damage.
The SF-1210S100W-2 can operate from -40°C to 125°C, but the maximum operating temperature range for optimal performance is -20°C to 100°C. Operating outside this range may affect the device's reliability and performance.
Handle the SF-1210S100W-2 in an ESD-protected environment, and wear an ESD wrist strap or use an ESD mat. Avoid touching the device's pins or exposed metal surfaces, and use ESD-safe packaging and storage materials.
Bourns recommends using input and output capacitors with a value of 10uF to 22uF, and a voltage rating of 50V or higher. The capacitors should be placed as close to the device as possible to minimize parasitic inductance and capacitance.

Community Provided

System Verified

Community Approved

Use the download button to access the SF-1210S100W-2 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like SF-12, or try a keyword search, such as Electric Fuses

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →