Bourns provides a recommended PCB layout and land pattern in their application note AN164, which can be found on their website. It's essential to follow these guidelines to ensure proper thermal management and to prevent overheating.
To ensure proper soldering, use a soldering iron with a temperature range of 250°C to 260°C, and apply a small amount of solder paste to the PCB pads. Use a soldering technique that minimizes the risk of cold solder joints, such as using a hot air reflow oven or a soldering iron with a fine tip.
The maximum allowable voltage drop across the fuse is not explicitly stated in the datasheet, but as a general rule, it's recommended to keep the voltage drop below 1V to ensure reliable operation and to prevent overheating. Consult with Bourns' technical support for specific guidance on your application.
The SF-2410FP063W-2 is rated for operation up to 125°C, but its performance may degrade at higher temperatures. If your application requires operation above 125°C, consult with Bourns' technical support to determine the suitability of this fuse for your specific use case.
Store the fuses in their original packaging or in a similar protective container to prevent mechanical damage. Avoid exposing the fuses to extreme temperatures, humidity, or physical stress during shipping and storage. Follow Bourns' recommended storage and handling guidelines to ensure the fuses remain in good condition.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SF-2410FP063W-2 Overview
Use the download button to access the SF-2410FP063W-2 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SF-24,
or try a keyword search, such as Electric Fuses
Suggested Parts
If you searched for SF-2410FP063W-2, you might also be interested in these parts:
