Ams OSRAM recommends a PCB layout with a large, unbroken ground plane and a small signal trace to minimize noise and parasitic capacitance. A 4-layer PCB with a dedicated ground plane is ideal.
Handle the SFH 4253-Z with ESD-protective equipment and follow proper ESD handling procedures. Use a wrist strap or mat, and ensure the PCB is properly grounded during assembly and testing.
The recommended operating temperature range for the SFH 4253-Z is -40°C to 100°C. However, the device can operate up to 125°C with reduced performance and lifespan.
Select an amplifier with a high input impedance, low noise, and a bandwidth that matches the photodiode's frequency response. A transimpedance amplifier (TIA) is recommended for optimal performance.
Ams OSRAM recommends a soldering profile with a peak temperature of 260°C, a dwell time of 10-30 seconds, and a cooling rate of 4°C/s. Follow the IPC-J-STD-020 standard for lead-free soldering.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SFH4253-Z Overview
Use the download button to access the SFH4253-Z schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SFH42,
or try a keyword search, such as Infrared LEDs
