ROHM recommends a PCB layout with a solid ground plane, short and wide traces for the high-frequency signals, and a decoupling capacitor (e.g., 100nF) close to the VCC pin to reduce noise and ensure stable operation.
To ensure proper biasing, connect the VCC pin to a stable 3.3V power supply, and the VSS pin to a solid ground. Also, make sure to decouple the VCC pin with a capacitor (e.g., 100nF) to reduce noise and ensure stable operation.
The SFR10EZPJ103 is designed to operate up to 100 MHz, but the actual operating frequency may vary depending on the specific application and PCB layout. It's recommended to consult the datasheet and application notes for more information.
To ensure proper thermal management, make sure to provide adequate heat dissipation through the PCB design, such as using thermal vias, heat sinks, or thermal pads. The maximum junction temperature (Tj) is 150°C, and the operating temperature range is -40°C to 85°C.
ROHM recommends using ESD protection devices, such as TVS diodes or ESD arrays, to protect the SFR10EZPJ103 from electrostatic discharge. The device is sensitive to ESD, and proper protection is necessary to prevent damage or malfunction.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SFR10EZPJ103 Overview
Use the download button to access the SFR10EZPJ103 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SFR10,
or try a keyword search, such as Fixed Resistors
