ROHM recommends a 4-layer PCB with a solid ground plane and a separate power plane for the Schottky barrier diode. The layout should also minimize parasitic inductance and ensure good thermal dissipation.
Follow ROHM's recommended soldering conditions and mounting guidelines, including using a soldering iron with a temperature of 350°C or less, and ensuring the component is mounted flat on the PCB with no warping or bending.
The SFR18EZPJ000 is rated for operation from -40°C to 125°C, but derating is required above 85°C. Consult the datasheet for specific derating curves and guidelines.
Yes, the SFR18EZPJ000 is suitable for high-frequency switching applications up to 100 kHz. However, ensure that the PCB layout and component selection are optimized for high-frequency operation, and consult ROHM's application notes for guidance.
Follow standard ESD handling procedures, including using an ESD wrist strap, mat, or workstation, and ensuring that all equipment and tools are properly grounded. The SFR18EZPJ000 has an internal ESD protection diode, but external protection measures are still recommended.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SFR18EZPJ000 Overview
Use the download button to access the SFR18EZPJ000 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SFR18,
or try a keyword search, such as Metal Glaze/Thick Film Resistors
