Littelfuse recommends a PCB layout with a large copper area connected to the thermal tab to dissipate heat efficiently. A minimum of 1 oz copper thickness is recommended, and the copper area should be at least 1 inch x 1 inch in size.
To ensure reliable soldering, Littelfuse recommends using a soldering iron with a temperature range of 250°C to 260°C, and a solder with a melting point of 180°C to 190°C. The component should be soldered within 3 seconds to 5 seconds, and the solder joints should be inspected for proper wetting and filleting.
The SH145 has a maximum surge current rating of 100 A for 1 ms, and 50 A for 10 ms. However, it's essential to note that the surge current rating may vary depending on the specific application and environmental conditions.
The SH145 is rated for operation up to 150°C, but it's essential to derate the component's current rating as the temperature increases. Littelfuse provides a derating curve in the datasheet to help engineers determine the maximum current rating at elevated temperatures.
Littelfuse recommends using a fuse holder or clip that is specifically designed for the SH145. The fuse holder or clip should be rated for the same current and voltage as the SH145, and should provide a secure and reliable connection to the PCB.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SH145 Overview
Use the download button to access the SH145 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search
or try a keyword search, such as Telecom Protection Circuits
