Part Image

SI5332A-D-GM2 - Skyworks

Description: Clock Generator 10MHz to 250MHz-IN 333.33MHz-OUT 40-Pin QFN EP

Download SI5332A-D-GM2 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
SI5332A-D-GM2 - Skyworks PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - 40-Pin Quad Flat No-Lead (QFN)
click to zoom
3D Models
SI5332A-D-GM2 - Skyworks  - 3D model - Quad Flat No-Lead - 40-Pin Quad Flat No-Lead (QFN)
click to zoom

SI5332A-D-GM2 Details

  • Manufacturer Part Number:

    SI5332A-D-GM2

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    QFN-40

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Manufacturer:

    Skyworks Solutions Inc

  • YTEOL:

    7.75

  • JESD-30 Code:

    S-XQCC-N40

  • Length:

    6 mm

  • Number of Terminals:

    40

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Clock Frequency-Max:

    333.33 MHz

  • Package Body Material:

    UNSPECIFIED

  • Package Code:

    HVQCCN

  • Package Equivalence Code:

    LCC40,.24SQ,20

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • Primary Clock/Crystal Frequency-Nom:

    250 MHz

  • Seated Height-Max:

    0.9 mm

  • Supply Current-Max:

    70 mA

  • Supply Voltage-Max:

    3.63 V

  • Supply Voltage-Min:

    1.71 V

  • Supply Voltage-Nom:

    1.8 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Width:

    6 mm

  • uPs/uCs/Peripheral ICs Type:

    CLOCK GENERATOR, PROCESSOR SPECIFIC

SI5332A-D-GM2 Frequently Asked Questions (FAQs)

  • The recommended PCB layout for the SI5332A-D-GM2 involves placing the device near the clock source, using a solid ground plane, and minimizing the length of the clock signal traces. Additionally, it is recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
  • To optimize power supply decoupling for the SI5332A-D-GM2, use a combination of ceramic and electrolytic capacitors with different values (e.g., 10nF, 100nF, and 1uF) placed close to the device. This helps to filter out noise and ensure a stable power supply.
  • The SI5332A-D-GM2 can support clock frequencies up to 1.5 GHz, but the maximum frequency may vary depending on the specific application and PCB layout. It is recommended to consult with Skyworks Solutions Inc or a qualified engineer for specific guidance.
  • To configure the SI5332A-D-GM2 for a specific clock output frequency, use the device's internal PLL and divider settings. The specific configuration will depend on the desired output frequency and the input clock frequency. Consult the datasheet and application notes for more information.
  • The typical power consumption of the SI5332A-D-GM2 is around 150-200 mW, depending on the specific configuration and operating conditions. However, this value may vary depending on the application and PCB design.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

SI5332A-D-GM2 Overview

Use the download button to access the SI5332A-D-GM2 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SI533, or try a keyword search, such as Clock Generators

Parts related to SI5332A-D-GM2

Showing 0 results