The recommended PCB layout for the SI5345D-D-GM can be found in the Skyworks Solutions application note AN20033, which provides guidelines for PCB design, component placement, and thermal management.
The SI5345D-D-GM can be configured for a specific frequency output using the I2C interface. The device has a set of registers that can be programmed to set the output frequency, phase, and amplitude. The Skyworks Solutions datasheet provides a detailed description of the register map and programming sequence.
The maximum operating temperature range for the SI5345D-D-GM is -40°C to +85°C. However, the device can be operated at temperatures up to +105°C with reduced performance and reliability.
The SI5345D-D-GM requires a stable power supply with proper decoupling to ensure reliable operation. A minimum of 0.1uF and 10uF decoupling capacitors should be placed close to the device, and a 1uF capacitor should be placed on the VDD pin. Additionally, a low-ESR capacitor should be used to filter the power supply noise.
The typical power consumption of the SI5345D-D-GM is around 350mW at 3.3V supply voltage and 100MHz output frequency. However, the actual power consumption may vary depending on the output frequency, amplitude, and load conditions.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SI5345D-D-GM Overview
Use the download button to access the SI5345D-D-GM schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SI534,
or try a keyword search, such as Clock Generators
