Bivar recommends a PCB layout with a solid ground plane and thermal vias to dissipate heat. A minimum of 1 oz copper thickness is recommended. Additionally, a thermal interface material (TIM) can be used to improve heat transfer between the LED and the heat sink.
Bivar recommends following the recommended soldering profile and using a solder with a melting point below 240°C. The LED should be soldered within 5 seconds of applying heat, and the peak temperature should not exceed 260°C. Avoid using excessive force or bending the LED during handling.
Bivar recommends driving the SLP3-150-150-F-GY at a maximum current of 350mA and a voltage of 12V to ensure optimal performance and lifespan. However, the actual drive current and voltage may vary depending on the specific application and environmental conditions.
Bivar recommends using a conformal coating or potting compound to protect the LED from moisture and other environmental factors. The LED should be handled in a clean and dry environment, and any cleaning solvents used should be compatible with the LED's materials.
Bivar specifies a minimum lifespan of 50,000 hours for the SLP3-150-150-F-GY, with a lumen maintenance of 70% at 50,000 hours. However, the actual lifespan and reliability may vary depending on the specific application, environmental conditions, and drive current.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SLP3-150-150-F-GY Overview
Use the download button to access the SLP3-150-150-F-GY schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SLP3-,
or try a keyword search, such as Optoelectronic Accessories
Suggested Parts
If you searched for SLP3-150-150-F-GY, you might also be interested in these parts:
