The recommended land pattern for the SMDJ45CA is a rectangular pad with a size of 2.5mm x 1.5mm, with a 0.5mm radius corner. The pad should be centered on the component and have a solder mask defined gap of 0.2mm.
Handle the SMDJ45CA by the body only, avoiding touching the leads or the glass passivation. Use an anti-static wrist strap or mat to prevent electrostatic discharge (ESD) damage. Avoid bending or flexing the leads, and use a pick-and-place machine or a vacuum pickup tool to handle the component during assembly.
The maximum allowable voltage for the SMDJ45CA is 45V, as indicated in the datasheet. Exceeding this voltage may cause the device to fail or degrade over time.
The SMDJ45CA is rated for operation up to 150°C, but it's recommended to derate the voltage and current ratings at higher temperatures. Consult the datasheet for specific derating curves and guidelines for high-temperature operation.
Ensure the SMDJ45CA is properly soldered by using a reflow profile with a peak temperature of 260°C, a dwell time of 30-60 seconds, and a cooling rate of 4°C/s. Use a solder paste with a melting point of 217°C to 220°C, and ensure the component is centered on the pad during assembly.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SMDJ45CA Overview
Use the download button to access the SMDJ45CA schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SMDJ4,
or try a keyword search, such as Transient Suppressors
