ROHM recommends a compact PCB layout with short traces and minimal vias to reduce parasitic inductance and capacitance. A 4-layer PCB with a solid ground plane is recommended. Additionally, the input and output pins should be separated by a distance of at least 1mm to minimize electromagnetic interference.
To ensure reliability in high-temperature applications, it is recommended to derate the maximum operating temperature and voltage ratings according to the datasheet. Additionally, a thermal design that allows for adequate heat dissipation, such as a heat sink or thermal pad, should be implemented. ROHM also recommends using a thermally conductive material for the PCB substrate.
The recommended input capacitor value for SMF24VTR is 10uF to 22uF, with a voltage rating of at least 25V. A low-ESR capacitor with a high ripple current rating is recommended to ensure stable operation and minimize voltage ripple.
Yes, SMF24VTR can be used in a switching regulator application. However, it is recommended to ensure that the switching frequency is within the recommended range of 100kHz to 500kHz, and that the output voltage is properly filtered to minimize ripple and noise.
To troubleshoot issues with SMF24VTR, it is recommended to check the input voltage, output voltage, and output current using an oscilloscope or multimeter. Verify that the input capacitor value and type are correct, and that the PCB layout is compact and well-designed. Also, check for any signs of overheating, such as excessive temperature rise or thermal shutdown.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SMF24VTR Overview
Use the download button to access the SMF24VTR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SMF24,
or try a keyword search, such as Transient Suppressors
