Bivar recommends a thermal pad on the PCB with a minimum size of 10mm x 10mm, and a thermal via array with a minimum of 5 vias, 0.3mm in diameter, spaced 1.5mm apart.
Use a soldering iron with a temperature of 250°C to 270°C, and apply a small amount of solder paste to the PCB pads. Hold the component in place with tweezers and apply gentle pressure while soldering.
The maximum forward voltage rating is 3.5V, exceeding this may cause damage to the LED or reduce its lifespan.
Yes, the SMS1105BWC is suitable for outdoor use, but ensure proper sealing and protection from environmental factors such as moisture, dust, and extreme temperatures.
Bivar recommends a drive current of 10mA to 20mA for optimal brightness and a lifespan of up to 50,000 hours.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SMS1105BWC Overview
Use the download button to access the SMS1105BWC schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SMS11,
or try a keyword search, such as Visible LEDs
