The recommended soldering temperature profile is 250°C for 3-5 seconds, with a peak temperature of 260°C for 1-2 seconds. This ensures reliable solder joints and prevents damage to the LED.
Use a PCB footprint with a locating peg or a recessed area to ensure proper alignment of the LED during assembly. Additionally, apply a small amount of adhesive, such as a dot of solder paste, to secure the LED in place.
The maximum forward current rating is 30mA. Exceeding this rating may reduce the LED's lifespan or cause damage.
While the SMTL4-SRGB is suitable for indoor use, it's not recommended for outdoor applications due to its limited environmental rating (IEC 60068-2-14, -40°C to 85°C). For outdoor use, consider using LEDs with a higher environmental rating, such as IP67 or higher.
Use proper ESD handling procedures, such as wearing an ESD strap, using ESD-safe work surfaces, and storing the LEDs in ESD-safe packaging. Additionally, consider adding ESD protection components, like TVS diodes, in the circuit design.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SMTL4-SRGB Overview
Use the download button to access the SMTL4-SRGB schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SMTL4,
or try a keyword search, such as Visible LEDs
