The SP-70 is designed to operate at frequencies between 50 kHz to 200 kHz, but it can be used up to 500 kHz with reduced performance.
Yes, the SP-70 can be used in a push-pull configuration, but it's essential to ensure that the transformer is properly biased and that the drive circuitry is designed to handle the push-pull configuration.
The maximum allowable temperature rise for the SP-70 is 40°C (72°F) above the ambient temperature, but it's recommended to keep the temperature rise below 30°C (54°F) for optimal performance and reliability.
The SP-70 is designed for low-voltage applications, but it can be used in high-voltage applications with proper insulation and safety precautions. However, it's essential to ensure that the transformer is designed and tested to meet the high-voltage requirements.
The recommended wire size for the primary and secondary windings depends on the specific application and current requirements. However, as a general guideline, a wire size of 18-20 AWG is recommended for the primary winding, and 20-22 AWG is recommended for the secondary winding.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SP-70 Overview
Use the download button to access the SP-70 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search
or try a keyword search, such as Audio Transformers
Suggested Parts
If you searched for SP-70, you might also be interested in these parts:
