Please enter a minimum 3 letters or numbers
Technical Content
Part Image

SP000063852 - Avago Technologies

Description: Broadcom SP000063852 850nm Fibre Optic Receiver, Round Push-in Collet Connector,Fiber Optic Receiver General Purpose 100MBd

Download SP000063852 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
SP000063852 - Avago Technologies - PCB symbol
click to zoom
PCB Footprints
SP000063852 - Avago Technologies PCB footprint - Other - Other - SP000063852-3
click to zoom
3D Models
SP000063852 - Avago Technologies - 3D model - Other - SP000063852-3
click to zoom

SP000063852 Details

  • Manufacturer Part Number:

    SP000063852

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Reach Compliance Code:

    Compliant

  • Manufacturer:

    Avago Technologies

  • Additional Feature:

    IT ALSO HAS RESPONSIVITY 440 MICRO AMPERE PER MICRO WATTS

  • Body Breadth:

    9 mm

  • Body Height:

    8.8 mm

  • Body Length or Diameter:

    24 mm

  • Dark Current-Max:

    10 nA

  • Fiber Optic Device Type:

    PHOTODIODE DETECTOR

  • Fiber Type:

    POF

  • Mounting Feature:

    THROUGH HOLE MOUNT

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Operating Wavelength-Max:

    1100 nm

  • Operating Wavelength-Min:

    400 nm

  • Operating Wavelength-Nom:

    850 nm

  • Surface Mount:

    NO

  • Transmission Type:

    ANALOG

SP000063852 Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the GPS antenna away from noisy components and ensure a clear line of sight to the sky.
  • Use the module's power-saving modes, such as periodic mode or low-power mode, and adjust the update rate to balance power consumption and accuracy. Consult the module's programming guide for specific commands.
  • A ceramic patch antenna or a helical antenna with a gain of 3-5 dBi is recommended. Place the antenna on the PCB with a clear line of sight to the sky, away from metal components and shields.
  • Check for antenna orientation, nearby interference sources, and PCB layout issues. Verify the module's configuration and firmware version. Consult the module's troubleshooting guide for specific steps.
  • While possible, indoor GPS reception may be limited due to signal attenuation and multipath effects. Consider using assisted GPS (A-GPS) or other locationing technologies, such as Wi-Fi or cellular-based positioning, for indoor applications.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

SP000063852 Overview

Use the download button to access the SP000063852 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SP000, or try a keyword search, such as Fiber Optic Detectors

Parts related to SP000063852

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑