A multi-layer PCB with a solid ground plane and thermal vias is recommended. Ensure a minimum of 1 oz copper thickness and a thermal conductivity of 1 W/m-K. A heat sink or thermal pad can be used to dissipate heat.
Use a shielded enclosure, keep the SP746 away from high-frequency sources, and ensure proper grounding and decoupling. Follow the recommended PCB layout and use EMI filters if necessary.
The SP746 can withstand a maximum surge current of 100 A for 10 ms, but it's recommended to limit the surge current to 50 A for 10 ms to ensure reliable operation.
The SP746 is rated for operation up to 70°C and 10,000 ft altitude. For higher altitudes or temperatures, derate the device according to the datasheet or consult with Solid State Optronics Inc.
Use a multimeter to check voltage and current levels. Verify proper PCB layout, decoupling, and grounding. Consult the datasheet and application notes for troubleshooting guidelines.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SP746 Overview
Use the download button to access the SP746 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search
or try a keyword search, such as Solid State Relays
