Part Image

SPD24601B - Carlo Gavazzi

Description: DIN Rail Power Supplies Switching Power Supply, AC/DC, 60W, 24V, Spring Terminals, IP20, DIN-Rail Mounting, Over-load, Over-voltage and Short-circuit Protections, 40.5x90x114mm housing

Download SPD24601B Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
3D Models
SPD24601B - Carlo Gavazzi  - 3D model
click to zoom
Note! To download footprints and symbols, use the build and request forms below

Build

Launch Build Wizard
Build Wizard not available for this package category!

Request (48 hours)

SPD24601B Details

  • Manufacturer Part Number:

    SPD24601B

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    PACKAGE

  • ECCN Code:

    EAR99

  • Manufacturer:

    Carlo Gavazzi Holding AG

  • YTEOL:

    7

  • Additional Feature:

    90-375 VDC INPUT ALSO AVAILABLE

  • Analog IC - Other Type:

    AC-DC REGULATED POWER SUPPLY MODULE

  • Approvals:

    CCC, CE, EN, UL, TUV

  • Efficiency (Main Output):

    89%

  • Input Voltage-Max:

    264 V

  • Input Voltage-Min:

    85 V

  • Input Voltage-Nom:

    100 V

  • JESD-30 Code:

    R-PXMA-X

  • Length:

    114 mm

  • Line Regulation-Max:

    0.5%

  • Load Regulation-Max:

    0.5%

  • Number of Functions:

    1

  • Number of Outputs:

    1

  • Operating Temperature-Max:

    71 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Current-Max:

    2.5 A

  • Output Voltage-Max:

    28 V

  • Output Voltage-Min:

    24 V

  • Output Voltage-Nom:

    24 V

  • Package Body Material:

    PLASTIC

  • Package Code:

    XMA

  • Package Shape:

    RECTANGULAR

  • Package Style:

    MICROELECTRONIC ASSEMBLY

  • Protections:

    OVER LOAD, OVER VOLTAGE, SHORT CIRCUIT

  • Ripple Voltage (Main Out):

    0.0176 Vrms

  • Seated Height-Max:

    90.5 mm

  • Surface Mount:

    NO

  • Technology:

    HYBRID

  • Terminal Form:

    UNSPECIFIED

  • Terminal Position:

    UNSPECIFIED

  • Total Power Output-Max:

    60 W

  • Trim/Adjustable Output:

    YES

  • Warm-up Time:

    1 s

  • Width:

    40.5 mm

SPD24601B Frequently Asked Questions (FAQs)

  • The recommended PCB layout for the SPD24601B involves keeping the high-frequency signals away from the low-frequency signals, using a solid ground plane, and minimizing the length of the traces. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
  • To ensure proper cooling, the SPD24601B should be mounted on a heat sink with a thermal resistance of less than 10°C/W. The heat sink should be attached to the device using a thermal interface material, and the entire assembly should be placed in a well-ventilated area to allow for airflow.
  • The SPD24601B can withstand surge currents up to 10 kA (8/20 μs) according to IEC 61643-11. However, it's recommended to use a surge protection device (SPD) with a higher surge current rating to ensure the safety of the device and the entire system.
  • Yes, the SPD24601B can be used in outdoor applications, but it's essential to ensure that the device is properly sealed and protected from environmental factors such as moisture, dust, and extreme temperatures. The device should be installed in a weather-resistant enclosure, and all connections should be sealed to prevent water ingress.
  • To troubleshoot issues with the SPD24601B, start by checking the power supply voltage and ensuring that it's within the recommended range. Next, verify that the device is properly connected and configured. If the issue persists, check the device's status indicators, such as the LED lights, to identify any fault conditions. Finally, consult the datasheet and application notes for troubleshooting guides and contact Carlo Gavazzi's technical support if necessary.

Trust Checks

No trust score is available for this model.
Trust Score Unavailable
Sponsored

SPD24601B Overview

Use the download button to access the SPD24601B 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like SPD24, or try a keyword search, such as Power Supply Modules

Parts related to SPD24601B

Showing 0 results

Select Package Category

Package Categories

Datasheet PDF Preview